Free Next Day Delivery
Trusted! We're No. 1 on TrustPilot
Expert Advice & Demonstration
& Repairs

Do you need help? Call us 0800 622 6224

Narrow Piping Foot 820918096


Order before 4pmMon - Frifor Same Day Dispatch

Narrow Piping Foot 820918096 Overview

The Narrow Piping Foot is used to make trim for home projects, fashion projects or wherever you’d like to add a finishing touch. It is used to cover 1mm cords with fabric for specialty piping and insert the piping into seams or edges for a tailored finish. It can also be used with packaged piping. The clear view allows you to see the piping placement and know exactly where you are stitching. 

To stitch piping into a seam:

  1. Snap on the Narrow Piping Foot
  2. Place the piping with the raw edges along the seam line on the right side of fabric. Place the second piece of fabric on top with the right sides together.
  3. Put the fabric and piping layers under the Piping Foot with the piping in the groove on the underside of the foot.
  4. Select a straight stitch, length 2.5. Sew. The groove on the underside of the foot will guide the piping as you sew.

To make piping from your fabric:

  1. Snap on the Narrow Piping Foot
  2. Cut bias or crosswise grain strips, wide enough to cover the cording plus seam allowances.
  3. Lay the cording on the wrong side of the fabric strip and wrap the fabric over the cord.
  4. Place the fabric and cord under the Narrow Piping Foot with the cord in the groove on theunderside of the foot.
  5. Sew using a straight stitch, 2.5mm stitch length. The groove will guide the cord so the fabric covers it evenly. 
  6. Use your new piping in projects following the steps above.

TIP: When you sew this piping into a project, adjust the needle position so it stitches one setting closer to the cord, to hide the first stitching.

Category: A, B, C, D, E, F, G, J, K, L

Product Code: 820918096