Quilters Kit JQ3F

Quilters Kit JQ3F Overview

This set is ideal for any quilter, these feet offer great visibility when sewing free hand & doing patchwork, it contains the following feet:

1. Open toe walking foot & quilters guide
   
2. Free motion open toe foot
   
3. 1/4" patchwork foot
   

Open Toe Walking Foot & Quilters Guide

To attach:

1. Raise the need and presser foot.
2. Loosen the thumbscrew on the foot holder and remove it.
3. Attach the walking foot to the presser bar with the lever on the needle clamp, and secure it with the setscrew.

To sew:

• Select the straight stitch with centre needle drop position.
• Quilting is produced by stitching two layers of fabric together with batting in between to add dimension and warmth.
• Also this stitch can be used for a reinforcement stitch.

How to attach the quilt guide to the walking foot:

1. Push the quilt guide downward into the slot.
2. Set the guide at the desired seam width by moving the guide to the right or to the left.

Free Motion Open Toe Foot

To attach:

1. Raise the needle and presser foot.
2. Loosen the thumbscrew on the foot holder and remove it.
3. Attach the darning foot to the presser bar with the pin on the needle clamp, and secure it with the thumbscrew.

To sew:

1. Select the straight stitch with centre needle drop position.
2. Drop the feed dog.
3. Draw the desired pattern on the fabric with a pencil or tailor chalk.
4. Set the fabric under the presser foot and guide the fabric with your hands.

1/4" Seam Foot

To Sew:

1. Select the straight stitch with centre needle drop position.
2. Place the patchwork pieces right sides together.
3. Sew while guiding the edge of the fabric along the guide on the foot to keep a precise ¼” seam allowance.

* NOTE: Select the straight stitch with the centre needle drop position only. Otherwise the needle may hit the foot and break.

Suitable for: Top loading machines

Product Code: JANJQ3F