JQ1 Extension Table & Presser Feet

JQ1 Extension Table & Presser Feet Overview

Contains:

Quilting table
1/4" seam foot
Free motion quilting open toe foot
Walking open toe foot
Ditch quilting foot
Craft open toe foot
Quilting Guide

1/4" Seam Foot

To Sew:

• Select the straight stitch with centre needle drop position.
• Place the patchwork pieces right sides together.
• Sew while guiding the edge of the fabric along the guide on the foot to keep a precise ¼” seam allowance.

*NOTE: Select the straight stitch with the centre needle drop position only. Otherwise the needle may hit the foot and break.

Ditch Quilting Foot

To sew:

• Select the straight stitch with centre needle drop position.
• Place the quilt layers aligning the seam line with the guide.
• Lower the foot and sew while guiding the seam line along the guide.

Craft Foot

To sew:

• Select theapplique stitch.
• Guide theapplique fabric, so that the needle falls off the edge of theapplique when the needles swings to the right.
• The open toe of the foot provides a better view of stitching.
• Walking Foot/Quilt Guide

To attach:

• Raise the need and presser foot.
• Loosen the thumbscrew on the foot holder and remove it.
• Attach the walking foot to the presser bar with the lever on the needle clamp, and secure it with the setscrew.

To sew:

• Select the straight stitch with centre needle drop position.
• Quilting is produced by stitching two layers of fabric together with batting in between to add dimension and warmth.
• Also this stitch can be used for a reinforcement stitch.
• How to attach the quilt guide to the walking foot:
• Push the quilt guide downward into the slot.
• Set the guide at the desired seam width by moving the guide to the right or to the left.

*NOTE: The quilt guide will help to keep the stitching lines straight lines straight. Sew guiding the quilt guide over the previous row of stitching.

Darning Foot

To attach:

• Raise the needle and presser foot.
• Loosen the thumbscrew on the foot holder and remove it.
• Attach the darning foot to the presser bar with the pin on the needle clamp, and secure it with the thumbscrew.

To sew:

• Select the straight stich with centre needle drop position.
• Drop the feed dog.
• Draw the desired pattern on the fabric with a pencil or tailor chalk.
• Set the fabric under the presser foot and guide the fabric with your hands.

*NOTE: This foot is specially designed for free hand quilting. Do not pull the fabric toward you while stitching. It may deflect the needle causing it to break.

Table Dimensions: 360 x 290mm (14 x 11 1/4 inches) Approx.

Suitable for: Jem Platinum 760, 720