Free Next Day Delivery
Trusted! We're No. 1 on TrustPilot
Expert Advice & Demonstration
Servicing
& Repairs
Finance
Available
Product
Guarantee

Do you need help? Call us 0800 622 6224

Rolled Hem Foot 3mm for IDT System 820249096

£26.00

Order before 4pmMon - Frifor Same Day Dispatch

Rolled Hem Foot 3mm for IDT System 820249096 Overview

Hemming prevents the edges from fraying and results in a clean, durable edge. With the Rolled Hem foot, you can hem light to medium weight fabrics for clothing and home decorating items without having to pre-iron the fabric edges.

How to use the Rolled Hem foot:

  1. Select a straight stitch, snap on the Rolled Hem foot and engage IDT system (if available on your machine). If needed, press only the beginning of the hem to 2, 3 or 4mm wide, depending on the size of your foot.
  2. Place it flat in the groove under the foot and sew and pull the cut edge of the fabric into the scroll of the hemmer.
  3. Lower the foot and continue sewing while holding few stitches.
  4. Lower the needle into the fabric to hold it in place. Then raise the presser to the cut edge up in front of the foot.
  5. Do not allow fabric to run under the right half of the presser foot.

TIP: Hem crisp fabrics with a straight stitch. Hem soft fabrics with a zigzag that just encases the mm size of the hem. (Sharply curved areas are not suitable for this type hemmer.)

Category: B, C, D, E, F, G, J, K, L

Product code: 820249096

Top