Quilters Kit JQ6F

Quilters Kit JQ6F Overview

This set is ideal for any quilter, these feet offer great visibility when sewing free hand & doing patchwork, it contains the following feet:

1/4" seam foot
Free motion open toe foot
Open toe walking foot & quilters guide
Ditch quilting foot
Craft open toe foot
Quilting Guide

1/4" Seam Foot

To Sew:

• Select the straight stitch with centre needle drop position.
• Place the patchwork pieces right sides together.
• Sew while guiding the edge of the fabric along the guide on the foot to keep a precise ¼” seam allowance.
  

*NOTE: Select the straight stitch with the centre needle drop position only. Otherwise the needle may hit the foot and break.

Ditch Quilting Foot

To sew:

• Select the straight stitch with centre needle drop position.
• Place the quilt layers aligning the seam line with the guide.
• Lower the foot and sew while guiding the seam line along the guide.

Craft Foot

To sew:

• Select the applique stitch.
• Guide the applique fabric, so that the needle falls off the edge of the applique when the needles swings to the right.
• The open toe of the foot provides a better view of stitching.

Open Toe Walking Foot & Quilters Guide

To attach:

1. Raise the need and presser foot.
2. Loosen the thumbscrew on the foot holder and remove it.
3. Attach the walking foot to the presser bar with the lever on the needle clamp, and secure it with the setscrew.

To sew:

• Select the straight stitch with centre needle drop position.
• Quilting is produced by stitching two layers of fabric together with batting in between to add dimension and warmth.
• Also this stitch can be used for a reinforcement stitch.

How to attach the quilt guide to the walking foot:

1. Push the quilt guide downward into the slot.
2. Set the guide at the desired seam width by moving the guide to the right or to the left.

*NOTE: The quilt guide will help to keep the stitching lines straight lines straight. Sew guiding the quilt guide over the previous row of stitching.

Free Motion Open Toe Foot

To attach:

1. Raise the needle and presser foot.
2. Loosen the thumbscrew on the foot holder and remove it.
3. Attach the darning foot to the presser bar with the pin on the needle clamp, and secure it with the thumbscrew.

To sew:

• Select the straight stich with centre needle drop position.
• Drop the feed dog.
• Draw the desired pattern on the fabric with a pencil or tailor chalk.
• Set the fabric under the presser foot and guide the fabric with your hands.

* NOTE: This foot is specially designed for free hand quilting. Do not pull the fabric toward you while stitching. It may deflect the needle causing it to break.

Suitable for: Category B machines

Product Code: JANJQ2F