Free Next Day Delivery
Trusted! We're No. 1 on TrustPilot
Expert Advice & Demonstration
Servicing
& Repairs
Finance
Available
Product
Guarantee

Do you need help? Call us 0800 622 6224

Grand Piping Foot for IDT System 820977096

£28.00

-OR-

Order withinfor Same Day Dispatch

Grand Piping Foot for IDT System 820977096 Overview

The Grand Piping foot is perfect for inserting thick home dec piping into seams or wherever you’d like to add a more personal finishing touch. The Grand Piping foot is used to cover large cords with fabric for specialty piping and insert the piping into seams or edges for a tailored finish. The trim is sewn between the two layers of fabric in one step. You can also create your own piping for a custom finish. This foot can be snapped on to the right or the left of the needle which makes it possible to both create and sew the piping into the seam and to beautifully topstitch along the piping.

To make piping from your fabric:

  1. Snap on the Grand Piping Foot to the right side of the needle.
  2. Engage the IDT system.
  3. Cut fabric strips on the bias or crosswise grain, wide enough to cover the cording plus seam allowances.
  4. Lay the cording on the wrong side of the fabric strip and wrap the fabric over the cord.
  5. Place the fabric and cord under the Grand Piping foot with the cord to the left of the foot.
  6. Select a straight stitch, 2.5 mm stitch length. Move the needle position to the left. Sew.
  7. Use your new piping in projects following the steps above.

TIP: When you sew this piping into a project, adjust the needle position so it stitches one setting closer to the cord, to hide the fi rst stitching.

To stitch piping into a seam:

  1. Snap on the Grand Piping foot to the right side of the needle.
  2. Engage the IDT system.
  3. Select a straight stitch, length 2.5.
  4. Place the piping on the right side of fabric, matching raw edges. Position under the foot with the piping to the left of the foot.
  5. Add a second piece of fabric on top so right sides are together and piping sandwiched between the layers.
  6. Position under the Grand Piping foot with the piping to the left of the foot.
  7. Sew.

Tip: Clip the seam allowance around curves and at corners to reduce bulk and allow the seams to lay flat.

Topstitching:

  1. Snap the Grand Piping foot to the left side of the needle.
  2. Engage the IDT system.
  3. Open the seam and fold so the piping is along the fabric edge. Press.
  4. Sew a row of topstitching to the left of the seam line.

Category: G, J, K*, L

Not suitable for: Smarter by Pfaff 260c, 160s, 140s

Product code: 820977096

In the Box

  • Except Pfaff Smarter
  • G
  • J
  • K*
Top