Free Motion Quilting Foot For MC11000/11000SE/6600P - 200442004

Free Motion Quilting Foot For MC11000/11000SE/6600P - 200442004 Overview

This new style free motion quilting foot has been designed to ensure that only minimum pressure is applied to the fabric at the moment the needle penetrates resulting in improved stitch quality. Its simple design means a quieter more stable movement as no lever is placed over the needle clamp screw as with the standard type free motion foot. Movement is linked solely with the presser foot bar resulting in quieter operation at higher speeds. In addition, the fabric layers can be moved more easily as there is no delay between the ascent of the needle and that of the foot after each stitch. The clearance between the foot and the fabric can be adjusted with the top screw so that the foot simply skims the surface without impairment.

Note: This design of free motion foot can be found in the Convertible Free Motion Quilting Foot Set.

How to use the Free Motion Quilting Foot:

1. Do not select any pattern other than the straight stitch with the centre needle position, otherwise the needle will hit the foot and break.
2. Remove the foot holder and attach the free motion quilting foot. Make sure the needle enters the centre of the hole in the foot.
3. Lower the foot (turn the hand wheel to bring the presser bar to the lowest position on the MC11000). Adjust the height of the foot by turning the round nut until the bottom of the foot barely touches the top of quilt layers.
4. Sew at medium speed while guiding the quilt layers with your hands.

Suitable for: MC11000, 11000SE, 6600P

Product Code: 200442004