
calcActive())">

Bias Binder 1/4" (6 mm) 412989545
The Bias Binder foot is used to bind edges with 1/4" (6 mm) bias binding, cut a 1" (24 mm) wide bias strip of light weight fabric, or use packaged narrow double fold bias binding. Straight stitch, length 2.5, or zigzag or decorative stitch at desired length.
£39.00
Typical High St. Price
In Stock
Learn more about the Bias Binder 1/4" (6 mm) 412989545
The Bias Binder foot is used to bind edges with 1/4" (6 mm) bias binding, cut a 1" (24 mm) wide bias strip of light weight fabric, or use packaged narrow double fold bias binding. Straight stitch, length 2.5, or zigzag or decorative stitch at desired length.
How to use the bias binder foot:
- Snap on Bias Binder foot.
- Cut the end of the bias tape to a point. Insert the bias tape from the outside of the funnel guide, into the slot and pull it down under the foot.
- Place the edge to be bound into the groove on the left side of the funnel guide.
- Adjust needle position as needed or to adjust the position of the binder funnel/guide, loosen the screw on the top of the foot and position the funnel guide as needed.
Category:1, 2, 3, 4, 5, 6, 7, 8
Product Code:412989545
- Binds edges of fabric
- 1/4" (6 mm) bias binding
- Category 1